Destination tables

When you run a pipeline, dlt creates tables in the destination database and loads the data from your source into these tables. In this section, we will take a closer look at what destination tables look like and how they are organized.

We start with a simple dlt pipeline:

import dlt

data = [
    {'id': 1, 'name': 'Alice'},
    {'id': 2, 'name': 'Bob'}
]

pipeline = dlt.pipeline(
    pipeline_name='quick_start',
    destination='duckdb',
    dataset_name='mydata'
)
load_info = pipeline.run(data, table_name="users")

note

Here we are using the DuckDb destination, which is an in-memory database. Other database destinations will behave similarly and have similar concepts.

Running this pipeline will create a database schema in the destination database (DuckDB) along with a table named users. Quick tip: you can use the show command of the dlt pipeline CLI to see the tables in the destination database.

Database schema

The database schema is a collection of tables that represent the data you loaded into the database. The schema name is the same as the dataset_name you provided in the pipeline definition. In the example above, we explicitly set the dataset_name to mydata. If you don't set it, it will be set to the pipeline name with a suffix _dataset.

Be aware that the schema referred to in this section is distinct from the dlt Schema. The database schema pertains to the structure and organization of data within the database, including table definitions and relationships. On the other hand, the "dlt Schema" specifically refers to the format and structure of normalized data within the dlt pipeline.

Tables

Each resource in your pipeline definition will be represented by a table in the destination. In the example above, we have one resource, users, so we will have one table, mydata.users, in the destination. Here, mydata is the schema name, and users is the table name. Here also, we explicitly set the table_name to users. When table_name is not set, the table name will be set to the resource name.

For example, we can rewrite the pipeline above as:

@dlt.resource
def users():
    yield [
        {'id': 1, 'name': 'Alice'},
        {'id': 2, 'name': 'Bob'}
    ]

pipeline = dlt.pipeline(
    pipeline_name='quick_start',
    destination='duckdb',
    dataset_name='mydata'
)
load_info = pipeline.run(users)

The result will be the same; note that we do not explicitly pass table_name="users" to pipeline.run, and the table is implicitly named users based on the resource name (e.g., users() decorated with @dlt.resource).

note

Special tables are created to track the pipeline state. These tables are prefixed with _dlt_ and are not shown in the show command of the dlt pipeline CLI. However, you can see them when connecting to the database directly.

Nested tables

Now let's look at a more complex example:

import dlt

data = [
    {
        'id': 1,
        'name': 'Alice',
        'pets': [
            {'id': 1, 'name': 'Fluffy', 'type': 'cat'},
            {'id': 2, 'name': 'Spot', 'type': 'dog'}
        ]
    },
    {
        'id': 2,
        'name': 'Bob',
        'pets': [
            {'id': 3, 'name': 'Fido', 'type': 'dog'}
        ]
    }
]

pipeline = dlt.pipeline(
    pipeline_name='quick_start',
    destination='duckdb',
    dataset_name='mydata'
)
load_info = pipeline.run(data, table_name="users")

Running this pipeline will create two tables in the destination, users (root table) and users__pets (nested table). The users table will contain the top-level data, and the users__pets table will contain the data nested in the Python lists. Here is what the tables may look like:

mydata.users

id	name	_dlt_id	_dlt_load_id
1	Alice	wX3f5vn801W16A	1234562350.98417
2	Bob	rX8ybgTeEmAmmA	1234562350.98417

mydata.users__pets

id	name	type	_dlt_id	_dlt_parent_id	_dlt_list_idx
1	Fluffy	cat	w1n0PEDzuP3grw	wX3f5vn801W16A	0
2	Spot	dog	9uxh36VU9lqKpw	wX3f5vn801W16A	1
3	Fido	dog	pe3FVtCWz8VuNA	rX8ybgTeEmAmmA	0

When inferring a database schema, dlt maps the structure of Python objects (i.e., from parsed JSON files) into nested tables and creates references between them.

This is how it works:

1. Each row in all (root and nested) data tables created by dlt contains a unique column named _dlt_id (row key).
2. Each nested table contains a column named _dlt_parent_id referencing a particular row (_dlt_id) of a parent table (parent key).
3. Rows in nested tables come from the Python lists: dlt stores the position of each item in the list in _dlt_list_idx.
4. For nested tables that are loaded with the merge write disposition, we add a root key column _dlt_root_id, which references the child table to a row in the root table.

Learn more about nested references, row keys, and parent keys

Naming convention: tables and columns

During a pipeline run, dlt normalizes both table and column names to ensure compatibility with the destination database's accepted format. All names from your source data will be transformed into snake_case and will only include alphanumeric characters. Please be aware that the names in the destination database may differ somewhat from those in your original input.

Variant columns

If your data has inconsistent types, dlt will dispatch the data to several variant columns. For example, if you have a resource (i.e., a JSON file) with a field named answer and your data contains boolean values, you will get a column named answer of type BOOLEAN in your destination. If, for some reason, on the next load, you get integer and string values in answer, the inconsistent data will go to answer__v_bigint and answer__v_text columns respectively. The general naming rule for variant columns is <original name>__v_<type> where original_name is the existing column name (with data type clash) and type is the name of the data type stored in the variant.

Load packages and load IDs

Each execution of the pipeline generates one or more load packages. A load package typically contains data retrieved from all the resources of a particular source. These packages are uniquely identified by a load_id. The load_id of a particular package is added to the top data tables (referenced as _dlt_load_id column in the example above) and to the special _dlt_loads table with a status of 0 (when the load process is fully completed).

To illustrate this, let's load more data into the same destination:

data = [
    {
        'id': 3,
        'name': 'Charlie',
        'pets': []
    },
]

The rest of the pipeline definition remains the same. Running this pipeline will create a new load package with a new load_id and add the data to the existing tables. The users table will now look like this:

mydata.users

id	name	_dlt_id	_dlt_load_id
1	Alice	wX3f5vn801W16A	1234562350.98417
2	Bob	rX8ybgTeEmAmmA	1234562350.98417
3	Charlie	h8lehZEvT3fASQ	1234563456.12345

The _dlt_loads table will look like this:

mydata._dlt_loads

load_id	schema_name	status	inserted_at	schema_version_hash
1234562350.98417	quick_start	0	2023-09-12 16:45:51.17865+00	aOEb...Qekd/58=
1234563456.12345	quick_start	0	2023-09-12 16:46:03.10662+00	aOEb...Qekd/58=

The _dlt_loads table tracks complete loads and allows chaining transformations on top of them. Many destinations do not support distributed and long-running transactions (e.g., Amazon Redshift). In that case, the user may see the partially loaded data. It is possible to filter such data out: any row with a load_id that does not exist in _dlt_loads is not yet completed. The same procedure may be used to identify and delete data for packages that never got completed.

For each load, you can test and alert on anomalies (e.g., no data, too much loaded to a table). There are also some useful load stats in the Load info tab of the Streamlit app mentioned above.

You can add transformations and chain them together using the status column. You start the transformation for all the data with a particular load_id with a status of 0 and then update it to 1. The next transformation starts with the status of 1 and is then updated to 2. This can be repeated for every additional transformation.

Data lineage

Data lineage can be super relevant for architectures like the data vault architecture or when troubleshooting. The data vault architecture is a data warehouse that large organizations use when representing the same process across multiple systems, which adds data lineage requirements. Using the pipeline name and load_id provided out of the box by dlt, you are able to identify the source and time of data.

You can save complete lineage info for a particular load_id including a list of loaded files, error messages (if any), elapsed times, schema changes. This can be helpful, for example, when troubleshooting problems.

Staging dataset

So far, we've been using the append write disposition in our example pipeline. This means that each time we run the pipeline, the data is appended to the existing tables. When you use the merge write disposition, dlt creates a staging database schema for staging data. This schema is named <dataset_name>_staging by default and contains the same tables as the destination schema. When you run the pipeline, the data from the staging tables is loaded into the destination tables in a single atomic transaction.

Let's illustrate this with an example. We change our pipeline to use the merge write disposition:

import dlt

@dlt.resource(primary_key="id", write_disposition="merge")
def users():
    yield [
        {'id': 1, 'name': 'Alice 2'},
        {'id': 2, 'name': 'Bob 2'}
    ]

pipeline = dlt.pipeline(
    pipeline_name='quick_start',
    destination='duckdb',
    dataset_name='mydata'
)

load_info = pipeline.run(users)

Running this pipeline will create a schema in the destination database with the name mydata_staging. If you inspect the tables in this schema, you will find the mydata_staging.users table identical to the mydata.users table in the previous example.

Here is what the tables may look like after running the pipeline:

mydata_staging.users

id	name	_dlt_id	_dlt_load_id
1	Alice 2	wX3f5vn801W16A	2345672350.98417
2	Bob 2	rX8ybgTeEmAmmA	2345672350.98417

mydata.users

id	name	_dlt_id	_dlt_load_id
1	Alice 2	wX3f5vn801W16A	2345672350.98417
2	Bob 2	rX8ybgTeEmAmmA	2345672350.98417
3	Charlie	h8lehZEvT3fASQ	1234563456.12345

Notice that the mydata.users table now contains the data from both the previous pipeline run and the current one.

Dev mode (versioned) datasets

When you set the dev_mode argument to True in the dlt.pipeline call, dlt creates a versioned dataset. This means that each time you run the pipeline, the data is loaded into a new dataset (a new database schema). The dataset name is the same as the dataset_name you provided in the pipeline definition with a datetime-based suffix.

We modify our pipeline to use the dev_mode option to see how this works:

import dlt

data = [
    {'id': 1, 'name': 'Alice'},
    {'id': 2, 'name': 'Bob'}
]

pipeline = dlt.pipeline(
    pipeline_name='quick_start',
    destination='duckdb',
    dataset_name='mydata',
    dev_mode=True # <-- add this line
)
load_info = pipeline.run(data, table_name="users")

Every time you run this pipeline, a new schema will be created in the destination database with a datetime-based suffix. The data will be loaded into tables in this schema. For example, the first time you run the pipeline, the schema will be named mydata_20230912064403, the second time it will be named mydata_20230912064407, and so on.

dlt’s internal tables

dlt automatically creates internal tables in the destination schema to track pipeline runs, support incremental loading, and manage schema versions. These tables use the _dlt_ prefix.

_dlt_loads: Load history tracking

This table records each pipeline run. Every time you execute a pipeline, a new row is added to this table with a unique load_id. This table tracks which loads have been completed and supports chaining of transformations.

Column name	Type	Description
load_id	STRING	Unique identifier for the load job
schema_name	STRING	Name of the schema used during the load
schema_version_hash	STRING	Hash of the schema version
status	INTEGER	Load status. Value 0 means completed
inserted_at	TIMESTAMP	When the load was recorded

Only rows with status = 0 are considered complete. Other values represent incomplete or interrupted loads. The status column can also be used to coordinate multi-step transformations.

_dlt_pipeline_state: Pipeline state and checkpoints

This table stores the internal state of the pipeline for each run. This state enables incremental loading and allows the pipeline to resume from where it left off if a previous run was interrupted.

Column name	Type	Description
version	INTEGER	Version of this state entry
engine_version	INTEGER	Version of the dlt engine used
pipeline_name	STRING	Name of the pipeline
state	STRING or BLOB	Serialized Python dictionary of pipeline state
created_at	TIMESTAMP	When this state entry was created
version_hash	STRING	Hash to detect changes in the state
_dlt_load_id	STRING	Reference to related load in _dlt_loads
_dlt_id	STRING	Unique identifier for the pipeline state row

The state column contains a serialized Python dictionary that includes:

• Incremental progress (e.g. last item or timestamp processed).
• Checkpoints for transformations.
• Source-specific metadata and settings.

This allows dlt to resume interrupted pipelines, avoid reloading already processed data, and ensure pipelines are idempotent and efficient.

The version_hash is recalculated on each update. dlt uses this table to implement last-value incremental loading. If a run fails or stops, this table ensures the next run picks up from the correct checkpoint.

_dlt_version: Schema version tracking

This table tracks the history of all schema versions used by the pipeline. Every time dlt updates the schema. For example, when new columns or tables are added, a new entry is written to this table.

Column name	Type	Description
version	INTEGER	Numeric version of the schema
engine_version	INTEGER	Version of the dlt engine used
inserted_at	TIMESTAMP	Time the schema version entry was created
schema_name	STRING	Name of the schema
version_hash	STRING	Unique hash representing the schema content
schema	STRING or JSON	Full schema in JSON format

By keeping previous schema definitions, _dlt_version ensures that:

• Older data remains readable
• New data uses updated schema rules
• Backward compatibility is maintained

This table also supports troubleshooting and compatibility checks. It lets you track which schema and engine version were used for any load. This helps with debugging and ensures safe evolution of your data model.

Loading data into existing tables not created by dlt

You can also load data from dlt into tables that already exist in the destination dataset and were not created by dlt. There are a few things to keep in mind when doing this:

If you load data into a table that exists but does not contain any data, in most cases, your load will succeed without problems. dlt will create the needed columns and insert the incoming data. dlt will only be aware of columns that exist on the discovered or provided internal schema, so if you have columns in your destination that are not anticipated by dlt, they will remain in the destination but stay unknown to dlt. This generally will not be a problem.

If your destination table already exists and contains columns that have the same name as columns discovered by dlt but do not have matching datatypes, your load will fail, and you will have to fix the column on the destination table first, or change the column name in your incoming data to something else to avoid a collision.

If your destination table exists and already contains data, your load might also initially fail, since dlt creates special non-nullable columns that contain required mandatory metadata. Some databases will not allow you to create non-nullable columns on tables that have data, since the initial value for these columns of the existing rows cannot be inferred. You will have to manually create these columns with the correct type on your existing tables and make them nullable, then fill in values for the existing rows. Some databases may allow you to create a new column that is non-nullable and take a default value for existing rows in the same command. The columns you will need to create are:

name	type
_dlt_load_id	text/string/varchar
_dlt_id	text/string/varchar

For nested tables, you may also need to create:

name	type
_dlt_parent_id	text/string/varchar
_dlt_root_id	text/string/varchar